Chapter 2 Using Scan Kiosk II V2.0
This chapter describes how to use the Scan Kiosk II V2.0 solution. It also shows how to log
on to Scan Kiosk II V2.0 (if configured), and how to use Job Buttons, scan to a shared folder,
an e-mail address (if a mail server is configured), and to USB memory.
2.1
Logging On
If the Administrator configured an Authentication server and log-on credentials, you
must log on to the device.
There are two log on screen types:
1. List Type:
2. Key-in Type:
IMPORTANT
The User Name and Password fields are case-sensitive.
Scan Kiosk II V2.0 User's Guide
You must select your user name from a list of registered users.
You must enter your user name and password.
19