Installing A 3.5-Inch Drive Into A 5.25-Inch Drive Bay - Compaq Deskpro Workstation AP240 Reference Manual

6. Gently rotate the drive cage back into the workstation
7. Remove the blank drive bezel from the inside of the front
8. Replace the workstation cover.
9. Reconfigure the workstation, if necessary. Refer to Chapter

Installing a 3.5-Inch Drive into a 5.25-Inch Drive Bay

1. If you have locked the Smart Cover Lock, use Computer
2. Shut down the operating system properly, turn off the
chassis.
CAUTION:
When returning the drive cage to its normal position,
use extreme caution to prevent damaging the data and power
cables.
bezel.
2, "Software," for more information.
If you normally lock the Smart Cover Lock, use Computer
Setup to relock the lock and enable the Smart Cover
Sensor.
Setup to unlock the lock and disable the Smart Cover
Sensor.
workstation, disconnect the power cord from the electrical
outlet, and remove the workstation cover.
Reference Guide 5-21