Sliding Out the System Board Tray
The slide-out system board tray allows you to quickly remove
the system board, without using tools.
!
1. If you have locked the Smart Cover Lock, use Computer
2. Shut down the operating system properly, then turn off the
3. Disconnect the power cord from the power outlet.
4. Remove the workstation cover.
5. Raise the expansion card cage. You do not need to remove
6. After removing the green thumbscrew securing the system
Sliding Out the System Board Tray
WARNING:
Before removing the workstation cover, ensure that
the workstation is turned off and that the power cord is
disconnected from the electrical outlet.
Setup to unlock the lock and disable the Smart Cover
Sensor.
workstation and any external devices.
the cage from the chassis.
board tray, grasp the back edge of the system board tray
and slide it straight out of the chassis.
Reference Guide
5-7