Cleaning the Print Head
Clean the print head whenever the print quality is poor. There are two methods for cleaning
the print head.
I Print Head Cleaning
This method takes about 30 seconds and improves print quality.
I Deep Print Head Cleaning
Use this more thorough method only after five consecutive print head cleanings fail to
produce a satisfactory Nozzle Check Pattern. This method takes about 60 seconds and
corrects severe nozzle clogging.
1
Make sure that the printer is turned on.
2
Press and hold down the RESUME button until you hear the required
number of beeps and then release it.
Print head cleaning
Deep print head cleaning
CARTRIDGE
POWER
RESUME
2 beeps (about 2 seconds)
3 beeps (about 3 seconds)
CHARGE
ERROR
Maintaining the Printer
61