I Closing the Printer Properties Dialog Box
After specifying the necessary print settings, close the Printer Properties dialog box and
start your print job.
1
Make sure that the information on Direction and Feed in the illustrated
guideline is correct.
Illustrated guideline
2
Click the OK button. The print settings become enabled and the Printer
Properties dialog box closes.
Note
• When you want to enable the print settings without closing the Printer
Properties dialog box, click the Apply button.
• When you do not want to enable the print settings, click the Cancel
button.
• When you want to revert the print settings to the factory settings, click
the Defaults button in each tab.
Printing With Windows 98 or Windows CE
Using Online Help
111