Canon BJC-55 User Manual page 39

• If you are using Windows 98, make sure a COM port has been selected for IrDA
with the Printer Wizard. Allocation of a port for an IrDA wireless interface may
depend on the computer you are using. Usually COM4 can be selected as an
external serial (COM) port. For details about your system configuration, refer to
your computer manual.
• If you are using Windows 2000, select IR as the destination printer port. For
details about how to do this, refer to your computer documentation.
• Make sure the BJC-55 is selected as the default printer within the BJC-55 printer
driver.
• Only the Microsoft IR Comm Driver Ver. 3.0 can be used as the IrDA driver for
the BJC-55 Series. Other IrDA drivers cannot be used.
• The IrDA interface cannot detect the printer status or reset the printer. If
communication between the printer and computer is interrupted, the print job is
stopped and the printer is initialized. (The data in the printer is cleared and the
paper is ejected.)
Setting Up and Using a Wireless Connection
Getting Ready to Print 39