Canon BJC-55 User Manual page 55

2
Connect the power cord to the AC adapter, insert the DC plug into the
printer, and insert the power cord into a power source.
The green CHARGE/ERROR light stays on until the battery pack is
completely recharged.
3
When the CHARGE/ERROR light goes off, you can disconnect the AC
adapter.
Note • The battery pack requires 4 to 6 hours (maximum) to recharge.
• The battery pack may become warm during a long print job and may
not start recharging until it has cooled (approximately 30 minutes).
Using the Battery Pack
Maintaining the Printer 55