Canon BJC-55 User Manual page 325

Problems and Solutions
Check to see if you have installed the wrong BJ cartridge for the print job
If the BJ cartridge is not appropriate for the print job, or if you attempt to start a print job with
the optional Scanner Cartridge installed, the printer will beep 4 times and the orange
CHARGE/ERROR light will flash. Install the correct BJ cartridge to resume printing.
Check to see if you have removed the battery pack
If the battery pack is not installed correctly, the orange CHARGE/ERROR light comes on
and the printer beeps 6 times. Make sure the battery pack is installed correctly.
Check the ink level in the BJ tanks
If the low-ink alert has been turned on, the orange CHARGE/ERROR light will flash and the
printer beeps twice. You can continue the print job until the ink runs out by pressing the
RESUME button, but immediate replacement of the BJ tank is recommended. Use the
printer driver or the printer's operation panel to reset the low-ink alert after replacing the
BJ tank.
Using the Low-Ink Alert
Check to see if you have stopped the BJ cartridge replacement
If you discontinue the BJ cartridge replacement, the printer will beep 3 times and the
orange CHARGE/ERROR light will flash. Press the CARTRIDGE button to continue
BJ cartridge replacement. If you intend to use the printer in this situation, then press the
RESUME button.
Check to see if a long print job has been executing on battery power only
When the battery power runs low, the printer emits alternate long and short beeps and the
CHARGE/ERROR light comes on. Turn off the printer. Connect the AC adapter to the
printer then plug it into a power outlet, or remove the battery and install a charged battery.
Troubleshooting 325