Wall Mounting - ZyXEL Communications NBG7510 User Manual

2.4 Wall Mounting

Please refer to the installation guide below for the wall mounting procedures of the Zyxel Device. You
may need screw anchors if mounting on a concrete or brick wall.
Figure 10 Wall Mounting Screw Specifications
Table 4 Wall Mounting Information
Distances between holes
M4 Screws
Screw Anchors
Do the following to attach your Zyxel Device to a wall.
1 Select a position free of obstructions on a wall strong enough to hold the weight of the Zyxel Device.
2 Mark two holes on the wall at the appropriate distance apart for the screws.
Figure 11 Wall Mounting Distance
Be careful to avoid damaging pipes or cables located inside the wall
when drilling holes for the screws.
Do not wall mount the Zyxel Device over a height of 2 m.
Chapter 2 Hardware
105 mm
Two
Two
NBG7510 User's Guide
23