ZyXEL Communications NBG7510 User Manual page 111

Table 35 Network Setting > Wireless > Guest/More AP > Edit (continued)
LABEL DESCRIPTION
Guest WLAN Select this to create Guest WLANs for home and external clients. Select the WLAN type in the
Access Scenario field.
Access Scenario If you select Home Guest, clients can connect to each other directly.
If you select External Guest, clients are blocked from connecting to each other directly.
Max. Upstream Specify the maximum rate for upstream wireless traffic to the WAN from this WLAN in kilobits per
Bandwidth second (Kbps).
Max. Specify the maximum rate for downstream wireless traffic to this WLAN from the WAN in kilobits
Downstream per second (Kbps).
Bandwidth
BSSID This shows the MAC address of the wireless interface on the Zyxel Device when wireless LAN is
enabled.
SSID Subnet Click on this switch to Enable this function if you want the wireless network interface to assign
DHCP IP addresses to the associated wireless clients.
This option cannot be used if the WPS function is enabled in the Network > Wireless > WPS screen
or if the Keep 2.4G and 5G wireless network name the same check box is selected in Network >
Wireless > General.
DHCP Start Specify the first of the contiguous addresses in the DHCP IP address pool.
Address
The Zyxel Device assigns IP addresses from this DHCP pool to wireless clients connecting to the
SSID.
DHCP End Specify the last of the contiguous addresses in the DHCP IP address pool.
Address
SSID Subnet Specify the subnet mask of the Zyxel Device for the SSID subnet.
Mask
LAN IP Specify the IP address of the Zyxel Device for the SSID subnet.
Address
Security Level
Security Mode Select More Secure (WPA2-PSK) to add security on this wireless network. The wireless clients
which want to associate to this network must have the same wireless security settings as the Zyxel
Device. After you select to use a security, additional options appears in this screen.
Or you can select No Security to allow any client to associate this network without any data
encryption or authentication.
See Section 9.2.1 on page 106
Generate Select this option to have the Zyxel Device automatically generate a password. The password
password field will not be configurable when you select this option.
automatically
Password WPA2-PSK uses a simple common password, instead of user-specific credentials.
If you did not select Generate password automatically, you can manually type a pre-shared key
from 8 to 64 case-sensitive keyboard characters.
Click the Eye icon to show or hide the password of your wireless network. When the Eye icon is
slashed
Click this
Encryption Select the encryption type (AES or TKIP+AES) for data encryption.
Select AES if your wireless clients can all use AES.
Select TKIP+AES to allow the wireless clients to use either TKIP or AES.
Timer The Timer is the rate at which the RADIUS server sends a new group key out to all clients.
Chapter 9 Wireless
for more details about this field.
, you'll see the password in plain text. Otherwise, it's hidden.
to show more fields in this section. Click again to hide them.
NBG7510 User's Guide
111