Advertisement
Set Up a WPS Connection
Press the WPS button on the Q1000Z's front panel for more than 5
seconds to turn the WPS function on.
Follow these steps to add a WPS-enabled device to the wireless network
using the WPS button.
Wall-mounting
Take the following steps to hang your Q1000Z on a wall.
1. Select a position free of obstructions on a sturdy wall.
2. Drill two holes for the screws, exactly 110 mm apart.
8
Place the devices you want to connect
1
near one another.
2
Press the WPS button on the Q1000Z.
The WPS light blinks.
Press the WPS button on a compatible
3
device within 2 minutes of pressing the
button on the Q1000Z.
The WPS light on the Q1000Z shines
steadily when connected.
Advertisement
