Wmm - ZyXEL Communications NBG7510 User Manual

Figure 60 Network Setting > Wireless > WPS
The following table describes the labels in this screen.
Table 37 Network Setting > Wireless > WPS
LABEL
General
WPS
Add a new device with WPS Method
Method 1 PBC
WPS
Cancel
Apply

9.6 WMM

Use this screen to enable WiFi MultiMedia (WMM) and WMM Automatic Power Save (APSD) in wireless
networks for multimedia applications. WMM enhances data transmission quality, while APSD improves
Chapter 9 Wireless
DESCRIPTION
Click to enable ( ) and have the Zyxel Device activate WPS. Otherwise, it is disabled.
Use this section to set up a WPS WiFi network using Push Button Configuration (PBC). Click this
switch to make it turn blue. Click Apply to activate WPS method 1 on the Zyxel Device.
Click this button to add another WPS-enabled WiFi device (within WiFi range of the Zyxel
Device) to your WiFi network. This button may either be a physical button on the outside of a
device, or a menu button similar to the WPS button on this screen.
Note: You must press the other WiFi device's WPS button within 2 minutes of pressing
this button.
Click Cancel to restore your previously saved settings.
Click Apply to save your changes.
NBG7510 User's Guide
114