Others Screen - ZyXEL Communications NBG7510 User Manual

power management of wireless clients. This allows delay-sensitive applications, such as voice and
videos, to run more smoothly.
Click Network Setting > Wireless > WMM to display the following screen.
Figure 61 Network Setting > Wireless > WMM
Note: WMM cannot be disabled if 802.11 mode includes 802.11n or 802.11ac.
Note: APSD only affects SSID1. For SSID2-SSID4, APSD is always enabled.
The following table describes the labels in this screen.
Table 38 Network Setting > Wireless > WMM
LABEL
WMM of SSID
WMM
Automatic
Power Save
Delivery (APSD)
Cancel
Apply

9.7 Others Screen

Use this screen to configure advanced wireless settings, such as additional security settings, power
saving, and data transmission settings. Click Network Setting > Wireless > Others. The screen appears as
shown.
Chapter 9 Wireless
DESCRIPTION
Select On to have the Zyxel Device automatically give the
according to the ToS value in the IP header of packets it sends. WMM QoS (
Quality of Service) gives high priority to video, which makes them run more smoothly.
If the 802.11 Mode in Network Setting > Wireless > Others is set to include 802.11n or 802.11ac,
WMM cannot be disabled.
Select this option to extend the battery life of your mobile devices (especially useful for small
devices that are running multimedia applications). The Zyxel Device goes to sleep mode to save
power when it is not transmitting data. The AP buffers the packets sent to the Zyxel Device until
the Zyxel Device "wakes up." The Zyxel Device wakes up periodically to check for incoming
data.
Note: This works only if the WiFi device to which the Zyxel Device is connected also
supports this feature.
Click Cancel to restore your previously saved settings.
Click Apply to save your changes.
NBG7510 User's Guide
115
WiFi
network (SSIDx) a priority level
WiFi
MultiMedia