ZyXEL Communications NBG7510 User Manual page 137

interface with the Zyxel Device itself as the gateway for the LAN network. When you use IP alias, you can
also configure firewall rules to control access to the LAN's logical network (subnet).
If your ISP provides the Public LAN service, the Zyxel Device may use a LAN IP address that can be
accessed from the WAN.
Click Network Setting > Home Networking > Additional Subnet to display the screen shown next.
Figure 74 Network Setting > Home Networking > Additional Subnet
The following table describes the labels in this screen.
Table 46 Network Setting > Home Networking > Additional Subnet
LABEL DESCRIPTION
IP Alias Setup
Group Name Select the interface group name for which you want to configure the IP alias settings.
Active Click this switch to configure a LAN network for the Zyxel Device. When the switch goes to the
right
IPv4 Address Enter the IP address of your Zyxel Device in dotted decimal notation.
Chapter 10 Home Networking
, the following fields will be configurable. Otherwise, they are not.
NBG7510 User's Guide
137