ZyXEL Communications NBG7510 User Manual page 87

Figure 41 LAN
Click the Arrow icon (
Figure 42 LAN Setup
Each field is described in the following table.
Table 21 Status Screen
LABEL DESCRIPTION
LAN IP Setup
IP Address Enter the LAN IPv4 IP address you want to assign to your Zyxel Device in dotted decimal
notation, for example, 192.168.123.1 (factory default).
Subnet Mask Type the subnet mask of your network in dotted decimal notation, for example 255.255.255.0
(factory default). Your Zyxel Device automatically computes the subnet mask based on the
IP Address you enter, so do not change this field unless you are instructed to do so.
IP Addressing Values
Beginning IP This field specifies the first of the contiguous addresses in the IP address pool.
Address
Ending IP This field specifies the last of the contiguous addresses in the IP address pool.
Address
DHCP Server State
DHCP Server This is the period of time a DHCP-assigned address is valid, before it expires.
Lease Time
When a client connects to the Zyxel Device, DHCP automatically assigns the client an IP
addresses from the IP address pool. DHCP leases each addresses for a limited period of time,
which means that past addresses are "recycled" and made available for future
reassignment to other devices.
Chapter 7 Connection Status
) to configure the LAN IP settings and DHCP setting for your Zyxel Device.
NBG7510 User's Guide
87