Equalizer Settings; Fader/Balance/Bass/Treble/Subwoofer Settings; Setting The Fader/Balance; Adjusting The Bass/Treble - Alpine iLX-407A Owner's Manual

Equalizer Settings

[EQ Presets] is selected on the Sound Setup Menu screen.
10 typical equalizer settings are preset at the factory for a
variety of musical source material.
Setting item:
EQ Presets
Setting contents:
FLAT (Initial setting) / POP / ROCK / CLASSICAL / JAZZ /
ELECTRONIC / HIP HOP / EASY LISTENING / COUNTRY /
NEWS
• Only one type can be set to On.
• When Equalizer Presets is set, the linked Graphic EQ settings
are also changed. We recommend storing Graphic EQ settings
in a Preset in advance.
• The Equalizer Presets setting can be configured when Defeat
is Off.
Fader/Balance/Bass/Treble/
Subwoofer Settings
[Fader/Balance/Bass/Treble/SubW.] is selected on the
Sound Setup Menu screen.
Setting item:
Fader/Balance/Bass/Treble/SubW.
Cancel
Sound setup finishes.
Fader/Balance Image area

Setting the Fader/Balance

Touch the desired point within the image area, or touch
[F] (Front), [R] (Rear), [L] (Left) or [R] (Right).
Fader:
15 (F) to 15 (R)
Balance:
15 (L) to 15 (R)
• To reset to the initial setting (F/R: 0, L/R: 0), touch
[ ].

Adjusting the Bass/Treble

Touch [ ] or [ ] for each item to be adjusted.
Setting item:
Bass, Treble
Setting contents:
-10 to 10 (Initial setting: 0)

Setting the Subwoofer

Adjusting the Subwoofer Level
Setting item:
Sub W.Level
Setting contents:
0 (Initial setting) to 15
• This setting is only available when "Subwoofer" is set to [On]
(page 26).
Setting the Subwoofer Phase
The subwoofer output phase is toggled Subwoofer Normal
(0°) or Subwoofer Reverse (180°).
Setting item:
Sub W.Phase
Setting contents:
0° (Initial setting), 180°
• This setting is only available when "Subwoofer" is set to [On]
(page 26).
23
-EN