Table of Contents
Advertisement
Presetting Stations Automatically
The tuner can automatically seek and store 6 strong stations
in the selected band in ascending order of frequency.
Select the desired band then touch and hold
[A.Memo].
The tuner automatically seeks and stores 6 strong stations
into the preset buttons in ascending order of frequency.
When automatic storing has completed, the station stored
in the preset 1 is selected.
• If no stations are stored, the tuner will return to the original
station you were listening to before the automatic storing
procedure began.
• You can cancel this process by touching [A.Memo] while the
tuner is automatically seeking stations. Canceling will return
the tuner preset to the previous setting.
Tuning to Preset Station
After selecting the desired band, touch the
desired preset button.
The preset station is received.
RDS Operation
Turning AF (Alternative Frequencies)
On or Off
The RDS (Radio Data System) is a radio information system
using the 57 kHz subcarrier of regular FM broadcasts. The
RDS allows you to receive a variety of information such as
traffic information, station names, and to automatically
re-tune to a stronger transmitter that is broadcasting the
same programme.
Touch [AF] to select the AF (Alternative
Frequency) ON or OFF mode.
In AF ON mode, the [AF] button lights up.
• RDS mode is not be displayed for the AM band.
• When the AF ON mode is selected, the unit automatically
tunes to a strong signal station in the AF list.
• Use the AF OFF mode when automatic re-tuning is not
required.
Tips
• The RDS digital data includes the following:
PI
Programme Identification
PS
Programme Service Name
AF
List of Alternative Frequencies
TP
Traffic Programme
TA
Traffic Announcement
PTY
Programme Type
EON
Enhanced Other Networks
• Refer to page 13 about "PI SEEK Setting, " "Receiving RDS
Regional (Local) Stations, " and "Setting PTY31 (Emergency
Broadcast) Reception. "
Interruption Function
Interruption Function is enabled, when the following
broadcast is received, the unit switches to the Radio source
screen automatically, and will receive broadcasts.
– PTY31 (Emergency Broadcast)*1, 2
– TA (Traffic Announcement)*3
*1 Set PTY31 to "On" in "Setting PTY31 (Emergency
Broadcast) Reception" (page 13).
*2 Not interrupted during the DAB broadcast reception.
*3 The Interruption Function for Traffic Announcements
works with DAB broadcasts. Therefore, even if the current
source is RDS, a Traffic Announcement by DAB broadcast
may interrupt.
• "RDS T.Info"/"RDS Alarm" is displayed during each respective
broadcast reception.
• To cancel the Interruption function, touch [TA], [RDS
T.Info] or [RDS Alarm].
• If no signal is received for more than 60 seconds, interrupt
function exits.
• When the interruption broadcast is over, the unit returns to
the previous screen.
• Does not interrupt during Hands-free phone talk. During
camera image display, only the sound may be interrupted.
31
-EN
Advertisement
Table of Contents
