Sound Setup; Setting The Fader/Balance; Adjusting The Bass/Middle/Treble; Adjusting The Graphic Equalizer Curve (Eq) - Alpine iLX-W670 Owner's Manual

Sound Setup

[Sound] is selected on the Setup menu screen.
You can set up items related to the sound quality.
<Setting item>
Fader/Balance (page 33)
Bass/Treble (page 33)
EQ Setting (page 33)
Preset EQ (page 34)
X-Over (page 35)
Speaker Level (page 36)
Time Correction (page 35)
Sub Woofer (page 35)
Defeat (page 36)
* Touch [ ] or [ ] to show further .

Setting the Fader/Balance

A Back
Exit[Fader/Balance]Return [SOUND].
B Close
Close the current screen and return to the source screen
C Fader/Balance Image area
Touch the desired point within the image area, or touch [
[ ], [ ] or ].
Fader:
[15]Front to [15]Rear
Balance:
[15]Left to [15]Right
• To reset to the initial setting (Fader: F=R, Balance: L=R), touch [

Adjusting the Bass/Middle/Treble

Touch [ ] or [ ] for each item to be adjusted.
Setting item:
Bass, Middle, Treble
Setting contents:
-12 to 12 (Initial setting: 0)
• To reset the initial setting (Bass: 0, Middle: 0, Treble: 0), touch [Flat].
• When the Defeat setting is [On], you cannot perform the set up.

Adjusting the Graphic Equalizer Curve (EQ)

Setting item:
EQ
• When the Defeat setting is [On], you cannot perform the set up.
1
Adjust the EQ to your preference.
Adjusting the Band
],
Touch [Band] to select the band to be adjusted.
Band1 Band2 •••
• You can select a band directly by touching the screen.
Adjusting the Frequency
Touch of "Frequency" to adjust the frequency of the selected band
].
Band8 Band13 Band1
33
-EN