About Ilx-407A; Displaying The Product Information; Displaying Warranty/Copyright Information; Initializing The System - Alpine iLX-407A Owner's Manual

About iLX-407A

[About] is selected on the General Setup Menu screen.
[About] enables you to check the Serial No., Firmware
Version, Model Name, and to initialize various settings.

Displaying the Product Information

You can view the version information of this product. Make
note of this information and refer to it whenever you
contact Alpine Tech Support or an Alpine-authorized dealer.
Setting item:
Version Information
Setting contents:
Serial No. / SYSTEM version / Firmware Version
Displaying Warranty/Copyright
Information
Setting item:
Warranty/Copyright Information
Setting contents:
Open source licenses / Notice

Initializing the System

You can initialize all data, to restore the factory settings.
Remove the USB flash drive, etc. from the system before
operation.
1
Touch [Restore Factory Setting].
2
After the confirmation message appears,
touch [Yes].
The confirmation screen appears.
3
Touch [Confirm].
The system starts initialization.
• Do not turn on/off the power, change the ignition key position
or remove the screen panel until system restart is completed.

Installation Setup

[Installation] is selected on the General Setup Menu
screen.
Vehicle Setup enables you to check the connection status of
Reverse Lead/Parking Brake Lead.
When selecting the item, the Installation check screen is
displayed.
Setting item:
Installation
Setting contents:
Reverse / Parking Brake

Steering Wheel Position Setting

[Steering Wheel Position] is selected on the General Setup
Menu screen.
Set this item when Apple CarPlay is used/Android
smartphone which installed Android Auto App is
connected.
This setting influences Apple CarPlay/Android Auto mode.
Setting item:
Steering Wheel Position
Setting contents:
Left (Initial setting) / Right

Mute Setting

[Mute While Backing Up] is selected on the General Setup
Menu screen.
You can set the sound will be muted automatically when
the gear lever is moved to the reverse (R) position.
Setting item:
Mute While Backing Up
Touch [ ] (Off) or [
While Backing Up".
] (On) of "Mute
17
-EN