Getting Started; Location Of Controls; Turning Power On Or Off; Adjusting The Volume - Alpine iLX-407A Owner's Manual

7-inch audio/video receiver
Table of Contents

Advertisement

Getting Started

Location of Controls

Dimmer Sensor
Senses the brightness of the car interior.
Remote Sensor
Point the remote control transmitter towards the remote
sensor within a range of 2 meters.
/
(DOWN/UP) button
Adjusts the volume.
(MUTE) button
Activates/deactivates MUTE mode.
(HOME) button
Displays the HOME screen.
button
Activate Siri function or voice recognition mode.
(Phone) button
Displays the Phone Menu screen.
Touch to start a conversation when a call is incoming.
About the button descriptions used in this Owner's
Manual
The buttons found on the face of the unit are expressed
in bold (e.g.
(HOME)). The buttons found on the
touch-screen display are shown in bold within brackets,
[ ] (e.g. [OK]).

Turning Power On or Off

When the ignition key is turned to ACC or ON, the opening
screen will be automatically displayed.
1
Turn the ignition key to the ACC or ON
position.
The unit turns on.
• When the unit is used for the first time, the Radio
main screen is displayed.
• When turned on, the unit displays the last screen that
was displayed before the ignition key was turned off.
For example, if the unit is in radio mode when ignition
is turned off, it will remain in radio mode when
ignition is turned back on.
2
To turn the unit to off, turn the ignition key to
the OFF position.
• The unit is a precision device. Careful handling of the unit
should provide you with years of trouble-free operation.
• Some of this unit's functions cannot be performed while the
vehicle is in motion. Be sure to stop your vehicle in a safe
location and apply the parking brake before attempting these
operations.

Adjusting the Volume

Adjust the volume by touching
Volume decreases/increases continuously by touching and
holding
/ .
Volume: 0 to 35

Lowering Volume Quickly

Audio Mute function instantly lowers the volume level to 0.
1
Touch the
(MUTE) button to activate MUTE
mode.
The audio level will be 0.
2
Touch the
(MUTE) button again to bring
the audio back to previous volume level.
/ .
9
-EN

Advertisement

Table of Contents
loading

Table of Contents