Sound Setup; Setting The Media Xpander (Mx); Equalizer Settings; Fader/Balance/Bass/Treble/Subwoofer Settings - Alpine iLX-F259E Owner's Manual

9-inch digital media station
Table of Contents

Advertisement

Sound Setup

[Sound] is selected on the Settings menu screen.
You can set up items related to the sound quality.
Sound Setup Menu screen
Setting items:
Media Xpander (page 17)
EQ Presets (page 17)
Fader/Balance/Base/Treble/SubW. (page 17)
Graphic EQ (page 18)
Time Correction (page 18)
X-Over (page 19)
Volume (page 19)
Subwoofer (page 20)
Rear Speaker (page 20)
Defeat (page 20)

Setting the Media Xpander (MX)

[Media Xpander] is selected on the Sound Setup Menu screen.
Media Xpander (MX) makes vocals or instruments sound distinct
regardless of the music source. The USB Flash drive and iPod, will be
able to reproduce the music clearly even in cars with a lot of road noise.
Setting item:
Media Xpander
1
Touch the check box of [ALL MX].
2
Touch any of [Off] [Level 1] [Level 2] [Level 3].
• To cancel MX mode, set [Off] in step 1.
• MP3/WMA/AAC can have its own MX setting.
• When the Defeat setting is [On], you cannot perform the set up.
• The MX setting can be performed only when a source is currently
selected.

Equalizer Settings

[EQ Presets] is selected on the Sound Setup Menu screen.
10 typical equalizer settings are preset at the factory for a variety of
musical source material.
Setting item:
EQ Presets
Setting contents:
FLAT (Initial setting) / POP / ROCK / CLASSICAL / JAZZ / ELECTRONIC / HIP
HOP / EASY LISTENING / COUNTRY / NEWS
• Only one type can be set to On.
• When Equalizer Presets is set, the linked Graphic EQ settings are also
changed. We recommend storing Graphic EQ settings in a Preset in
advance.
• The Equalizer Presets setting can be configured when Defeat is Off.

Fader/Balance/Bass/Treble/Subwoofer Settings

[Fader/Balance/Bass/Treble/SubW.] is selected on the Sound Setup
Menu screen.
Setting item:
Fader/Balance/Bass/Treble/SubW.
Cancel
Sound setup finishes.
Fader/Balance Image area

Setting the Fader/Balance

Touch the desired point within the image area, or touch [F]
(Front), [R] (Rear), [L] (Left) or [R] (Right).
Fader:
15 (F) to 15 (R)
Balance:
15 (L) to 15 (R)
• To reset to the initial setting (F/R: 0, L/R: 0), touch [
].
17
-EN

Advertisement

Table of Contents
loading

Table of Contents