Connecting 12-Volt Trigger Outputs To External Equipment - Runco NLMP22109 Installation & Operation Manual

➤
Connecting 12-volt
Trigger Outputs to
External Equipment
If your VX-22i is equipped with a CineWide with AutoScope system, connect the
AutoScope lens motor to a 12-volt trigger output on the VX-22i; see Figure 3-16.
Similarly connect other 12-volt trigger-activated equipment (such as retractable screens or
screen masks) to the other trigger outputs.
For more information on using the 12-volt triggers, refer to Triggers on page 58.
AutoScope Lens Motor (Rear)
Power
AC Input
Switch
3.5-mm
mini plug
Retractable Screen or other
12-volt trigger-activated
device
Figure 3-16. 12-volt Trigger Output Connections
Sleeve = Ground
Tip = +12V
34
HD1 (RCA)
Runco VX-22i Installation/Operation Manual
Rear Panel