To display the Main Menu, press the MENU button on the remote control (Figure 2-4) or
projector rear panel (Figure 2-2).
To select a menu item, use the
panel to highlight it. Then, to confirm your selection, press ENTER on the remote control
(or SELECT on the projector rear panel).
The VX-22i OSD menus are arranged hierarchically, as shown in Figure 4-1. Depending on
the selected input source and signal characteristics, some menu options may not be
available.
Runco VX-22i Installation/Operation Manual
and
buttons on the remote control or projector rear
45
4. Operation
4.1
Using the On-Screen
Menus