Connections To The Vx-22I; Connector Panel Access; Connecting Source Components To The Vx-22I - Runco NLMP22109 Installation & Operation Manual

3.7
Connections to the
VX-22i

Connector Panel Access

Connecting Source
Components to the VX-22i
Proceed as follows to connect the VX-22i to your video sources, external controller(s) – if
present – and AC power.
When connecting your equipment:
• Turn off all equipment before making any connections.
• Use the correct signal cables for each source.
• Ensure that the cables are securely connected. Tighten the thumbscrews on
connectors that have them.
➤
To access the connector panel, pull firmly on the cable access cover to open it.
➤
Connect your video sources to the VX-22i as shown and described in the sections that
follow.
HDMI Connections: See Figure 3-10.
Tip
HD3 (VGA / Y-Pb-Pr)
HD2 (BNC)
Figure 3-10. HDMI Source Connections
Use the HDMI inputs whenever possible. This ensures the highest
video quality because the signal is carried in the digital domain
throughout the entire signal path, from source component output
into the projector.
HD1 (RCA)
28
HDMI or
DVI-to-HDMI Cable
(sold separately)
BD/HD-DVD/
DVD/DTV STB
Runco VX-22i Installation/Operation Manual