Installing The Fixed Cinewide Base Plate (Vx-22I/Cinewide); Installing The Fixed Cinewide Base Plate - Runco NLMP22109 Installation & Operation Manual

➤
Installing the Fixed
CineWide Base Plate
(VX-22i/CineWide)
To install the fixed CineWide base plate on a VX-22i/CineWide:
1. Place the projector upside down on a blanket or other soft surface.
2. Line up the mounting holes on the lens mount base plate with those on the bottom of
the projector, directly below the primary lens (see Figure 3-9).
3. Secure the base plate to the projector with the screws provided for this purpose.
CineWide
Base Plate
Figure 3-9. Installing the Fixed CineWide Base Plate
26
Screw, Phillips
Pan-Head,
M6-1.0 x 12mm (4x)
Runco VX-22i Installation/Operation Manual