Connecting 12-Volt Trigger Outputs To External Theater Equipment - Runco VIDEO XTREME VX-22D Installation & Operation Manual

If your VX-22d is equipped with a CineWide with AutoScope system, connect the
AutoScope lens motor to a 12-volt trigger output on the DHD Controller; see Figure 3-17.
Similarly connect other 12-volt trigger-activated equipment (such as retractable screens or
screen masks) to the other trigger outputs.
For more information on using the DHD Controller triggers, refer to Triggers on page 65.
AutoScope Lens Motor (Rear)
Power
AC Input
Switch
3.5-mm
mini plug
Retractable Screen or other
12-volt trigger-activated
device
Figure 3-17. 12-volt Trigger Output Connections
Runco VX-22d Installation/Operation Manual
Sleeve = Ground
Tip = +12V
INPUTS
RS-232 / 485
ERFACE
DHD Controller
Rear Panel
HD1 (RCA)
Y / G Pb / B Pr / R Hs Vs
I II III
I
TRIGGERS
37
Connecting 12-Volt
Trigger Outputs to
External Theater
Equipment
Y
I
HDMI
Installation