Memory Module - HP Pavilion DV7T-6000 Maintenance And Service Manual

Memory module

NOTE: The computer can be equipped with up to two memory modules. The primary memory module
is installed in the memory module socket closest to the system board. The expansion memory module is
installed in the memory module socket farthest from the system board.
Description
4 GB (DDR3, 10600, 1333-MHz)
2 GB (DDR3, 10600, 1333-MHz)
1 GB (DDR3, 10600, 1333-MHz)
Before removing a memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service cover (see
Remove the memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The memory module tilts up.)
2. Remove the memory module (2) by pulling it away from the slot at an angle.
Battery on page 45).
Optical drive on page 46).
Component replacement procedures
Spare part number
621569-001
621565-001
639736-001
53