Table of Contents
Advertisement
3.
Remove the two Phillips PM2.5×5.0 screws (1) and the three Phillips PM2.5×3.0 screws (2) that
secure the rear speakers to the computer.
4.
Turn the computer right side up, with the front toward you.
5.
Open the computer.
6.
Release the rear speaker cable from the clips (1) and the routing channel built into the base
enclosure. Remove the rear speaker (2).
Reverse this procedure to install the rear speakers and cables.
92
Chapter 4 Removal and replacement procedures
Hide quick links:
Advertisement
Table of Contents
