Table of Contents
Advertisement
3.
Remove the subwoofer (4) and cables.
Reverse this procedure to install the subwoofer and cables.
Display assembly
Description
17.3-in, BrightView, high definition+ (HD+), light-emitting diode (LED), low-voltage differential
signaling (LVDS) display assembly (includes webcam, two microphones, and wireless antenna
transceivers and cables)
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
●
Optical drive (see
●
Hard drive (see
●
WLAN module (see
●
Keyboard (see
●
Top cover (see
●
System board (see
●
Rear speakers (see
94
Chapter 4 Removal and replacement procedures
Battery on page
45), and then remove the following components:
Optical drive on page
Hard drive on page
49)
WLAN module on page
Keyboard on page
56)
Top cover on page
60)
System board on page
Rear speakers on page
46)
54)
79)
91)
Spare part number
639397-001
Hide quick links:
Advertisement
Table of Contents
