Table of Contents
Advertisement
3.
Remove the eight Phillips PM2.5×5.0 screws that secure the top cover to the computer.
4.
Remove the following screws:
(1) One Phillips PM2.5×7.0 screw in the rear left corner of the base enclosure
(2) Three Philllips PM2.5×3.0 screws in the optical drive bay
(3) Two Phillips PM2.5×9.0 screws on the right side of the base enclosure
5.
Turn the computer right-side up, with the front toward you.
6.
Open the computer.
Component replacement procedures
61
Hide quick links:
Advertisement
Table of Contents
