Information - Daikin ERGA08DAV3 Installer's Reference Manual

8 Configuration
▪ You have programmed a quiet mode schedule:
▪ During the night: Most quiet.
▪ During the day: Off to ensure the heating capacity of the
system.
▪ However, during the afternoon the baby is sleeping and you want
it to be quiet.
Then you can do the following:
1 Go to [7.4.1]: User settings > Quiet >
Activation.
2 Select Most quiet.
Advantage:
The outdoor unit runs in its most quiet level.
Electricity prices and gas price
Only applicable in combination with the bivalent function. See also
"Bivalent" on page 67.
# Code
[7.5.1] N/A Electricity price > High
[7.5.2] N/A Electricity price > Medium
[7.5.3] N/A Electricity price > Low
[7.6] N/A Gas price

INFORMATION

Electricity price can only be set when bivalent is ON
([9.C.1] or [C-02]). These values can only be set in menu
structure [7.5.1], [7.5.2] and [7.5.3]. Do NOT use overview
settings.
To set the gas price
1 Go to [7.6]: User settings > Gas price.
2 Select the correct gas price.
3 Confirm the changes.
INFORMATION
Price value ranging from 0.00~990 valuta/kWh (with 2
significant values).
To set the electricity price
1 Go to [7.5.1]/[7.5.2]/[7.5.3]: User settings >
Electricity price > High/Medium/Low.
2 Select the correct electricity price.
3 Confirm the changes.
4 Repeat this for all three electricity prices.
INFORMATION
Price value ranging from 0.00~990 valuta/kWh (with 2
significant values).
INFORMATION
If no schedule is set, the Electricity price for High is
taken into account.
To set the electricity price schedule timer
1 Go to [7.5.4]: User settings > Electricity
price > Schedule.
2 Program the selection using the scheduling screen.
You can set the High, Medium and Low electricity
prices according to your electricity supplier.
3 Confirm the changes.
Installer reference guide
62
Description
—
—
INFORMATION
The values correspond with the electricity price values for
High, Medium and Low previously set. If no schedule is set,
the electricity price for High is taken into account.
About energy prices in case of an incentive per kWh renewable
energy
An incentive can be taken into account when setting the energy
prices. Although the running cost can increase, the total operation
cost, taking into account the reimbursement will be optimized.
NOTICE
Make sure to modify the setting of the energy prices at the
end of the incentive period.
To set the gas price in case of an incentive per kWh renewable
energy
Calculate the value for the gas price with the following formula:
▪ Actual gas price+(Incentive/kWh×0.9)
For the procedure to set the gas price, see
page 62.
To set the electricity price in case of an incentive per kWh
renewable energy
Calculate the value for the electricity price with following formula:
▪ Actual electricity price+Incentive/kWh
For the procedure to set the electricity price, see
electricity price" on page 62.
Example
This is an example and the prices and/or values used in this
example are NOT accurate.
Data
Gas price
Electricity price
Renewable heat incentive per
kWh
Calculation of the gas price:
Gas price=Actual gas price+(Incentive/kWh×0.9)
Gas price=4.08+(5×0.9)
Gas price=8.58
Calculation of the electricity price:
Electricity price=Actual electricity price+Incentive/kWh
Electricity price=12.49+5
Electricity price=17.49
Price
Gas: 4.08 /kWh
Electricity: 12.49 /kWh
8.4.8 Information
Dealer information
The installer can fill in his contact number here.
# Code
[8.3] N/A Number that users can call in case of
problems.
Possible read-out information
In menu...
[8.1] Energy data
ERGA04~08DAV3(A) + EHVZ04+08S18+23DA +
"To set the gas price" on
"To set the
Price/kWh
4.08
12.49
5
Value in breadcrumb
[7.6]=8.6
[7.5.1]=17
Description
You can read out...
Produced energy, consumed
electricity, and consumed gas
EHVZ04+08S18+23DJ
Daikin Altherma 3 R F
4P495249-1B – 2019.06