Accessing A Protected Hard Drive; Changing A Drivelock Password Or Removing Drivelock Protection From A Drive - Compaq Armada M700 Series Reference Manual

9. To confirm DriveLock protection on the drive you have
selected, type DriveLock in the confirmation field, then
press
F10.
10. To save your DriveLock settings, then close Computer Setup
and restart the computer, select File!Save Changes and Exit,
then press
11. When prompted to confirm your action, press

Accessing a Protected Hard Drive

1. Ensure that the drive is inserted into the computer (not an
optional docking base).
2. When prompted for a DriveLock password, type the user or
master password, using the same keys you used to set the
password, then press
password correctly, you must restart the computer to try again.
Changing a DriveLock Password or
Removing DriveLock Protection from a Drive
CAUTION:
and loss of work, shut down the computer before inserting or
removing a hard drive. Do not insert or remove a hard drive while the
computer is on, in Suspend (Standby), or in Hibernation. To ensure
that the computer is not in Hibernation, turn the computer on, then
shut it down.
1. Ensure that the protected hard drive is inserted into the
computer (not an optional docking base).
2. Turn on the computer, then press
appears upper-right on the screen.
To change the language, press
For navigation instructions, press
3. Select Security!DriveLock passwords, then press
Enter.
Enter
To prevent damage to the computer and the hard drive
. After 2 attempts to enter the
when the blinking cursor
F10
F2.
F1.
Securing the Computer 6-13
F10.
Enter.