Accessing A Protected Hard Drive - Compaq Evo n1005v - Notebook PC Software Manual

DriveLock preferences are entered in the Setup Utility. To access
the DriveLock settings in the Setup Utility, shut down, then turn
on the notebook to open the utility. If you open the Setup Utility
from a Windows restart, DriveLock settings are not accessible.
1. To open the Setup Utility, turn on the notebook, then press
F10
is displayed in the lower left corner of the screen.
2. Select Security from the menu bar. (To select a menu, use the
arrow keys.)
3. Select the DriveLock Passwords field, then press
4. Read the warning. To continue, press
5. Type the password in the New Password field, then press
enter.
6. Type the password in the Confirm New Password field, then
press
7. To confirm DriveLock protection on the drive you have
selected, type the word
then press
8. To save your password, apply DriveLock protection to the
drive, and exit the Setup Utility, press
the menu bar). Select Exit Saving Changes, then follow the
instructions on the screen.

Accessing a Protected Hard Drive

When prompted for the DriveLock password, type your
DriveLock password using the same keys you used to set the
password, then press
the password correctly, you must restart the notebook to try again.
Software Guide
while the To Change System Settings, Press F10 message
enter.
F10.
enter.
in the confirmation field,
DriveLock
After 2 unsuccessful attempts to enter
Security Management
enter.
enter.
(or select Exit from
esc
2–7