Compaq Armada M700 Series Reference Manual page 150

4. Select a test type:
Quick Test runs a quick, general test on each device in a
selected category.
Complete Test performs maximum testing on each device
in a selected category.
Custom Test performs maximum testing on a selected
device.
To run all tests for your selected device, select the
Check All button.
To run only the tests you select, select the Uncheck All
button, then select the checkbox for each test you want
to run.
5. Select a test mode:
Interactive Mode provides maximum control over the
testing process. You determine whether the test was passed
or failed and may be prompted to insert or remove devices.
Unattended Mode does not display prompts. If errors are
found, they are displayed when testing is complete.
6. Select the Begin Testing button.
7. Select a tab to view a test report. The report on the
Status tab summarizes the tests run, passed, and failed
during the current testing session.
Log tab lists tests run on the computer, the numbers of
times each test has run, the number of errors found on each
test, and the total run time of each test.
Error tab lists all errors found on the computer with their
error codes.
8. To save the report on the
Log tab—Select the Log tab Save button.
Error tab—Select the Error tab Save button.
9. To print the report on the
Log tab—Select File menu!Save As, then print the file
from your folder.
Error tab—Select the Error tab Print button.
Computer Setup and Diagnostics Utilities 14-7