Setting Power Preferences in Windows NT 4.0
Preference
Enable/disable low-battery
warning beeps.
Exit Suspend after a user-
selected timeout.
Set Hibernation timeout.
Change location of the
hibernation file.
Enable/Disable Hibernation. Select Compaq Power!Hibernation tab,
4-18 Managing Power
Continued
Procedure from Control Panel
Select Compaq Power!Battery
Conservation Settings tab, then select the
On or Off radio button.
Select Compaq Power!Resume Timer
tab. Select the Enabled checkbox, then
select a date and time from the
corresponding drop-down list boxes.
Select Compaq Power!Hibernation tab,
then select a timeout from the Timeout
drop-down list box.
NOTE: This setting does not affect
system-initiated Hibernation during a
critical low-battery condition.
Select Compaq Power!Hibernation tab,
then select the new location from the
Drive for Hibernation File drop-down list
box.
then select the On or Off radio button.
CAUTION: If the computer reaches a critical
low-battery condition while Hibernation is
turned off, unsaved work will be lost.