Enabling the Keypad at Startup
To set the computer to start up with the embedded numeric
keypad enabled—
1. Turn on or restart the computer, then press
blinking cursor appears upper-right on the screen.
To change the language, press
For navigation instructions, press
2. Select Advanced!Device Options, then press
3. Toggle on the Num Lock State at Boot field, then press
4. To save your preferences, then close Computer Setup and
restart the computer, select File!Save Changes and Exit,
then press
5. When prompted to confirm your action, press
To disable the embedded numeric keypad at startup—
Repeat the above procedure, toggling off the Num Lock State at
Boot field.
The embedded numeric keypad can be enabled or disabled
NOTE:
with
Fn+Num Lk
2-14 Using the Keyboard
Enter.
in either startup state.
when the
F10
F2.
F1.
Enter.
F10.
.
F10