Compaq Armada M700 Series Reference Manual page 122

To install Windows NT Networking—
1. Select Start!Settings!Control Panel, then double-click the
Network icon.
2. At the Windows NT Networking installation prompt,
select the Yes button.
3. Select Wired to the Network, then select the Next button.
4. Select the Select from List button.
5. Select the Have Disk button.
6. When prompted, type the path to the Intel PRO/100+ Mini
PCI drivers:
C:\Program Files\Compaq\CPQLANModem\Network
7. Select the OK button.
8. Select Intel PRO Adapter.
9. Select the OK button.
10. Select the Next button.
11. Select the network protocol(s) for your LAN environment.
12. Select the Next button.
13. Select the network service(s) for your LAN environment.
14. Select the Next button, then continue to select the Next button
on succeeding screens until you are prompted to enter a drive
designator.
15. When prompted, type the drive designator for your
Windows NT 4.0 operating system. For example, if
Windows NT 4.0 is on your hard drive, type
the designator of your hard drive).
16. Select the binding(s) for your LAN environment.
17. Select the Next button, then continue to select the Next button
on succeeding screens until you are prompted to enter the
computer name and workgroup/domain information.
18. When prompted, enter the computer name and the
workgroup/domain information for your LAN environment,
then select the Next button.
19. Select the Finish button.
20. Restart the computer.
C:
Connecting to a Local Area Network
(where C: is
8-7