Printing Current Measurement Data; Printing Stored Data; Printing Single Stored Data Points; Printing All Data Stored In One Group - Hach DR/2010 Instrument Manual

3.7.1 Printing Current Measurement Data

Figure 13
Printed Data Format Example
25-JUN-96 13:45:23
25-JUN-96 14:03:11
26-JUN-96 07:12:46
*Denotes that a warning occurred during reading or the wavelength used was not the wavelength in the program

3.7.2 Printing Stored Data

3.7.2.1

Printing Single Stored Data Points

3.7.2.2

Printing All Data Stored in One Group

To print data that is displayed after a measurement, press
display will show
PRINTING . . . . .
measurement display. The printed information is sent in an 80-column
format (see Figure 13).
*1.245 mg/L An. Surfact
-0.05 Abs 300.2 %T
7.95 mg/L NO
2
To print stored data, you must display the data, then print it. To display the
data, use the Recall menu (see 3.6, Recalling Data).
When the data for the desired group and sample number are displayed,
press . The display will show (i.e., G100 is the group number
SHIFT PRINT
assigned; #3 is the sample number):
$ &&&&
Press . The display will show
ENTER
units and parameter.
If the data is stored only in Group 0, the display will only show the sample
number. The rest of the printing sequence is the same.
1. To print all the data in one group, press
sample number is displayed. Then press the
will show:
$ &&&&
and then return to the normal
575nm
575nm
-
HR *593nm
#" &&&
2HE J/ !
PRINTING. . . . .
#" &&&
2HE J/H K 
53
SHIFT PRINT
DR/2010 P710 SN:789456123
DR/2010 P710 SN:789456123
DR/2010 P373 SN:789456123
nm
and then return to the
after the group and
SHIFT PRINT
. The display
DOWN ARROW
nm
. The