Printing User Programs - Hach DR/2010 Instrument Manual

3.7.4 Printing User Programs

To have a written copy of a user program for reference, the program must
be completed and stored first (see section 3.9 Storing User Programs).
1. Press
SHIFT USER PRGM
The display will show (For example):
&&&& 
2. Select the desired user program number (scroll or use
3. Press . The display will show the program name.
ENTER
4. Press
SHIFT PRINT
&&&& $
To print the calibration table and other information about the program
press . To print the calibration table, the calibration curve and
ENTER
the other information about the program, press the
Printing the calibration curve is highly suggested, especially for
quadratic and cubic fits. A visual review is better than comparing r
correlation coefficients. The display will show (for example)
$ &&&&
5. Press .
ENTER
6. The display will show
name. Figure 17 shows the text printout for a user program.
The equations and coefficients in the software are of the form: Conc = f(Abs).
That is, concentration is a function of absorbance. The graphs, however, are
plotted using the inverse relationship. Absorbance is on the y-axis and
concentration is on the x-axis, implying an Abs = f(Conc) relationship.
Scroll to the
Edit Program
.
- @EJ2H
. The display will show (for example):
2HE J6ANJ
2HE J/H= DE?I
PRINTING . . . .
56
option. Press
#" &&&
nm
'$&
NUMERIC
#" &&& nm
DOWN ARROW
#" &&& nm
and return to the program
.
ENTER
keys).
.
2