Erasing User-Entered Programs - Hach DR/2010 Instrument Manual

3.12 Erasing User-Entered Programs

To change the program name, press
). The display will show (for example):
ARROW
&&&& 
8. The cursor will be flashing. Use the
left in the Program Name. The letters will be erased as you scroll left.
New characters are inserted in the space to the left of the cursor. Press
to accept the new characters. The
ENTER
necessary to bring the cursor back to enter any additional characters.
When finished, press
Editing the Symbol is the same as editing the Program Name.
The rest of the
Edit Program
Please refer to section 3.10 Creating A User Program.
It may take up to 35 seconds for the instrument to store the changes made
to the user program. Please leave the instrument on during this period.
1. Turn the instrument on with the
will show:
 &&&&
2. Press
SHIFT USER PRGM
The display will show:
 &&&&
3. Press the
DOWN ARROW
&&&& 
ENTER
"# &&&
EJH=JAE 2 @
SHIFT LEFT ARROW
SHIFT LEFT ARROW
to accept the entire name.
ENTER
menu is like the
key. After the self-test the display
/
I O
&&& #
- JAH2H H= 
to go to the
Create Program
# &&&
+ HA=JA2H H=
twice. The display will show:
# &&&
, A AJA2H H=
78
(if not, press the
DOWN
nm
to scroll to the
will then be
menu.
Create Program
nm
menu.
nm
nm