Hach DR/2010 Instrument Manual page 77

Select a user-entered program for review or modification as follows:
1. Turn the instrument on with the
 &&&&
2. If the instrument is in Momentary mode, select the Constant On mode
in the Setup menu (
by pressing
EXIT
3. Press
SHIFT USER PRGM
The display will show:
&&&& 
4. Press the
DOWN ARROW
 &&&&
5. Press . The display reads:
ENTER
 &&&&
6. Press if the program number displayed is the program you want
ENTER
to change. If not scroll to the program using the
the program number using the numeric keys.
7. When the correct program number is display, press
The display will show:
 &&&&
key. After the self-test the display is:
/
I O
- JAH2H H= 
). Return to the
SHIFT SETUP
.
to go to the
Create Program
+ HA=JA2H H=
once. The display will show:
- @EJ2H H=
-@EJ2H
2H H=  = A
77
# &&&
nm
Enter Program
menu.
&&& #
nm
&&& #
nm
"# &&&
nm
'#"
keys or enter
ARROW
ENTER
&&& "#
nm
prompt
.