Hach DR/2010 Instrument Manual page 40

Message
I/O Options
Date:xx-Sep-96
Time: xx:xx:xx
Beeper Options
Signal Average
Lang
Adjust Contrast
Auto Off
Program Update
Adjust nm
Service Menu
1. Press:
2. Press:
Table 5 Setup Menu Message Guide (Continued)
Submenu:
Baud: 9600 is default. Other choices: 4800, 2400, 1200, 600, 300
Bits: Default is 8; other choice is 7
Parity: None is default; Other choices: Even, Odd
Set day-month (alpha)-year (in that order); For example 06-Aug-96
Set hours-minutes-seconds (in that order). For example 23:30:21.
Submenu:
Key Beep: Default is On; Other choice: Off
Error Beep: Default is On; Other choice: Off
Alert Beep: Default is On; Other choice: Off
Default is Off; Other choice: On
Default is English; Other choices: Japanese, Dutch, Spanish,
Portuguese, French, and German
Arrow keys increase or decrease contrast; 10 choices possible.
Selects number of minutes between last key press and automatic
shutoff when in the momentary lamp mode.
Use this menu when updating Hach programs or entering new
Hach programs.
Calibrates the optics in the instrument.
Peak filter: Lets user determine the peak transmittance using the
808 nm filter.
Default Setup: DR/2010 Spectrophotometer will use factory
wavelength calibration with no adjustment.
For Hach Service personnel only.
. Wait for the self-test to finish.
/
I O
.
SHIFT SETUP
The first menu option is
automatically assign stored samples to a group number that is the
same as the program number. For example, the data for a reactive
phosphorus Test 'N Tube test will be stored in group 535 because the
program number in the DR/2010 is #535. Sample numbers may be
assigned automatically or by the operator in the Store Menu.
To change the OFF-ON status of Auto Group, press
press the
DOWN ARROW
On. Press when the desired status is displayed.
ENTER
Press the
DOWN ARROW
are not shown if Auto Group is ON).
Selections
. If Auto Group is ON, it will
Auto Group
). Use the keys to toggle between Off and
ARROW
to advance to the next option (options in step 3
40
(otherwise
ENTER