Hach DR/2010 Instrument Manual page 80

After the program is copied, enter the calibration data into the program by
using one of the methods described in 3.10 Creating A User Program,
starting at Step 23.
1. Turn the instrument on with the
will show:
 &&&&
2. Press
SHIFT USER PRGM
The display will show:
&&&& 
3. Press the
DOWN ARROW
 &&&&
4. To copy the program, press
show (for example):
 &&&&
5. If the flashing program number is not correct, enter the correct
number with the
user-entered programs using the
the correct number appears (this is the source program).
key. After the self-test the display
/
I O
&&& #
- JAH2H H= 
to go to the
Create Progra
&&& #
+ HA=JA2H H=
three times. The display will show:
# &&&
+
(if not, press
ENTER
# &&&
+
keys or scroll through the available list of
NUMERIC
ARROW
80
nm
m menu.
nm
nm
2H H=
). The display will
EXIT
nm
'$& 
keys. Then press
ENTER
when