Connecting Mics/Other Devices To Inputs 1-8 - Zoom ZF8N Operation Manual

Connecting mics/other devices to Inputs 1–8
The can record a total of 10 tracks simultaneously: 8 individual tracks with signals coming from Inputs 1–8 and a stereo mix
of these inputs on left and right tracks.
You can connect mics and the outputs of line-level devices such as keyboards, mixers, or instruments with active electronics
to Inputs 1–8 and record them to tracks 1–8. Alternatively, Inputs 1 and 2 can instead receive input from a ZOOM mic capsule
connected to the
Connecting mics
Connect dynamic and condenser mics with XLR plugs to
Inputs 1–8.
Phantom power (+24V/+48V) can be supplied to condenser
mics. (→ P .90)
Dynamic mic
(XLR cable)
NOTE
When disconnecting a mic, gently pull on the XLR plug while simul-
taneously pushing the connector lock release button.
08
MIC IN connector.
Condenser mic
(XLR cable)
Connecting line level equipment
Connect the TRS plugs of keyboards and mixers directly to
Inputs 1–8.
Direct input of passive guitars and basses is not supported.
Connect these instruments through a mixer or effects device.
Keyboard
(TRS cable)
Mixer
(TRS cable)