Zoom ZF8N Operation Manual page 44

Setting how recorded scenes are named and numbered
Setting value
The scene name and number are not used.
When recording files are created, they are named only
with the take number, such as "T001", "T002", "T003" and
None so on.
+
by 1.
Example: T001.wav
The name of the currently selected folder is used as the
scene name.
+
by 1. After advancing the scene number by 1, the cor-
Current Folder
responding folder will be used as the recording des-
tination. If that folder does not already exist, it will be
created.
Example: FOLDER001-T001.wav
The date is used as the scene name.
+
by 1.
Date
If recording occurs after the date changes, a scene folder
with the date will be created.
Example: 20150101-T001.wav
A scene name input by the user is used.
+
User Name by 1.
No folder is created in this case.
Example: MYSCENE001-T001.wav
44
Explanation
cannot be used to advance the scene number
can be used to advance the scene number
cannot be used to advance the scene number
can be used to advance the scene number
(continued)
Changing scene names
If Scene Name Mode is set to User Name, set the scene name
used like this.
3.
User Scene
Use to select
Name
, and press
4.
Edit
Use to select
and press .
5.
Edit the scene name.
See "Character input screen"
(→ P .13) for how to input
characters.
NOTE
The scene name is written to the <SCENE> metadata.
You cannot put a space or an @ mark at the beginning of the name.
.
,