Zoom ZF8N Operation Manual page 175

7.
The test completes.
The result of the evaluation will
be shown.
8.
Press to stop the test.
NOTE
Even if a performance test result is "OK", there is no guarantee
that writing errors will not occur. This information is just to provide
guidance.
Conducting a full test
5.
Full Test
Use to select
and press .
The amount of time required for
the full test will be shown.
6.
Yes
Use to select
and press .
7.
The test completes.
The result of the evaluation will
be shown.
If the access rate MAX reaches
100%, the card will fail (NG).
F8n
Multi Track Field Recorder
,
,
175