Connecting; Connecting Mics - Zoom PodTrak P4 Operation Manual

Connecting

Connecting mics

Connect mics to capture sound. Up to 4 mics can be connected.
INPUT SELECT switches 1–4
Set to
dynamic mic or to
using a condenser mic.
NOTE
• When an INPUT SELECT switch is set to
When connecting to a device that is not compatible with phantom power, do not set the INPUT SELECT
switch to . Doing so could damage the device.
• During recording, operating the INPUT SELECT switch will not change the phantom power supply
setting. The change will be applied after recording completes.
when using a
when
Dynamic and condenser mics
Use mic cables (with XLR
connectors) to connect them to
INPUT jacks 1–4.
2: HOT
, +48 V phantom power is supplied to that INPUT jack.
18
1: GND
3: COLD
MUTE buttons 1–4
Press to mute inputs.
These light when muted.