Zoom ZF8N Operation Manual page 23

Setting DC power supply (Ext DC) nominal voltage
4.
Nominal
Use to select
Voltage
, and press
5.
Use to select the
voltage, and press
HINT
• The nominal voltage is the voltage of the external DC power sup-
ply under normal conditions. This value should be indicated on
the outside of the external DC power supply.
• This can be set from 12.0 to 15.0 V in 0.2 V intervals.
.
.
Setting the AA battery type (Int AA)
4.
Battery
Use to select
Type
, and press
5.
Use to select the type,
and press .
NOTE
• When multiple power supplies are connected, they will be used
in the following order of precedence.
1. Dedicated AC adapter (DC IN)
2. External DC power supply (Ext DC)
3. AA batteries in unit (Int AA)
• The voltages of each power supply are shown on the display.
F8n
Multi Track Field Recorder
.
23