Exchanging Data With A Computer (Sd Card Reader) - Zoom ZF8N Operation Manual

Exchanging data with a computer (SD Card Reader)

By connecting the
Connecting to a computer
1.
Press .
2.
Use to select
and press .
3.
Use to select
Reader
, and press
4.
Connect the
144
to a computer, you can check and copy data on SD cards.
USB
,
SD Card
.
and computer with a USB cable.
NOTE
• The following operating systems are supported:
Windows: Windows 7 or later
Mac OS: Mac OS X (10.8 or later)
• The cannot operate on USB bus power. Use the internal bat-
teries, the dedicated AC adapter or an external DC power supply
to power it.
HINT
When the is connected to a computer, the SD cards loaded in
slots 1 and 2 are recognized as separate SD cards.
Disconnecting
1.
Disconnect on the computer.
Windows: Select
and Eject Media" icon on the bottom of the computer screen.
Mac OS: Drag and drop the
NOTE
Always follow correct computer disconnection procedures
before removing the USB cable.
2.
Disconnect the cable from the computer and the
and press .
from the "Safely Remove Hardware
icon to the Trash.
,