Zoom ZF8N Operation Manual page 87

Setting the release time
This sets the amount of time until limiting stops after the
input signal goes below the threshold.
5.
Release
Use to select
Time
, and press
6.
Use to adjust the time,
and press .
HINT
• Limiter operation is linked for tracks that have stereo link or MS
stereo link enabled. If the signal for either linked channel reaches
the threshold, the limiter will operate on both tracks.
• When the limiter is operating, the right-most segment of the level
meter and the mixer limiter indicator on the display light yellow.
.
NOTE
This setting can be made when On/Off is set to On (Normal).
F8n
Multi Track Field Recorder
87